ews-wifidoc-button  ews-wifisoft-button  ews-blog-button  Video Button  White Papers  ews-knowledgecenter-button  ews webinar button 

Enterprise-Grade Wi-Fi® and Bluetooth® in a SiP Module

The SSD40NBT is a Wi-Fi® and Bluetooth® System in Package (SiP) module that supports 802.11a/b/g/n via an SDIO interface and Bluetooth 2.1 via a UART interface. By supporting both Wi-Fi and Bluetooth in the same package, the SSD40NBT helps device manufacturers significantly reduce system size and cost. The module provides all of Summit's hardware and software capabilities including dual band antenna diversity, an expanded operating temperature range, a fully integrated software suite and advanced Wi-Fi/Bluetooth coexistence. The 15mm x 15mm package is dimensionally and pad compatible with the SSD30AG, providing a smooth upgrade path to 802.11a/b/g/n and integrated Bluetooth, reducing system cost while delivering the latest wireless capabilities. Please review the specifications tab above for complete device specifications, and the certifications tab for complete regulatory and certifications information.

 Click here to visit the Software Download Center. 

Download SSD40NBT Hardware Integration Guide (PDF) (version 4.4, 10/11//2013)

Download SSD40NBT Hardware Test Report (PDF) 

NOTE: The Bluetooth Special Interest Group (SIG) has recently implemented changes to the End Product Listing (EPL) process. For more information about this update, please see the Bluetooth SIG Listing Process Fact Sheet and FAQs About the Updated Qualification and Listing Process.

Physical Interface 0.4mm pitch QFN (Quad Flat Pack, No Leads
Wi-Fi® Interface 1-bit or 4-bit Secure Digital I/O
Bluetooth® Interface Host Controller Interface (HCI) using High Speed UART
Main Chip Broadcom BCM4329
Input Voltage Requirements 3.3 VDC +/- 10% (core)
I/O Signaling Voltage 1.8 or 3.3 VDC +/- 10%
Average Current Consumption, VDDIO =3.3 volts (at maximum transmit power setting)
Note: Standby refers to the radio operating in Pm1 powersave mode.

802.11a (with BT in standby) 

  • Transmit: 282 mA (931 mW) 
  • Receive: 92 mA (304 mW) 
  • Standby: TBD  

802.11b (with BT in standby) 

  • Transmit: 314 mA (1036 mW) 
  • Receive: 92 mA (304 mW) 
  • Standby: TBD  

802.11g (with BT in standby) 

  • Transmit: 288 mA (950 mW) 
  • Receive: 92 mA (304 mW) 
  • Standby: TBD  

802.11n (2.4 GHz)(with BT in standby) 

  • Transmit: 292 mA (964 mW) 
  • Receive: 92 mA (304 mW) 
  • Standby: TBD  

802.11n (5 GHz)(with BT in standby) 

  • Transmit: 270 mA (891 mW) 
  • Receive: 92 mA (304 mW) 
  • Standby: TBD  

Bluetooth® (with Wi-Fi in standby) 

  • Transmit: TBD mA (TBD mW) 
  • Receive: TBD mA (TBD mW) 
Operating Temperature -30° to 80°C (-22° to 176°F)
Operating Humidity 10 to 90% (non-condensing)
Storage Temperature -30% to 85%C(-22 to 185F)
Storage Humidity 10 to 90% (non-condensing)
Maximum Electrostatic Discharge 8 kV
Length 15.0 mm (0.59 in.)
Width 15.0 mm (0.59 in.)
Thickness 2.50 mm (0.01 in.)
Weight 1.0 g (0.04 oz.)
Mounting See the "Mounting" section for more information
Wi-Fi Media
  • Direct Sequence-Spread Spectrum (DSSS)
  • Complementary Code Keying (CCK)
  • Orthogonal Frequency Divisional Multiplexing (OFDM)
Bluetooth® Media Frequency Hopping Spread Spectrum (FSSS)
Wi-Fi® Media Access Protocol Carrier sense multiple access with collision avoidance (CSMA/CA)
Network Architecture Types Infrastructure and Ad Hoc
Wi-Fi® Standards IEEE 802.11a,802.11b, 802.11d, 802.11e, 802.11g, 802.11h 802.11i,802.11n
Bluetooth® Standards Bluetooth® version 2.1 with Enhanced Data Rate
Wi-Fi® Data Rates Supported
  • 802.11a (OFDM): 6, 9, 12, 18, 24, 36, 48, 54 Mbps
  • 802.11b (DSSS): 1, 2, 5.5, 11 Mbps
  • 802.11g (OFDM): 6, 9, 12, 18, 24, 36, 48, 54 Mbps
  • 802.11n (OFDM, MCS 0-7): 6.5, 7.2, 13.0, 14.4, 19.5, 21.7, 26.0, 28.9, 39.0, 43.3, 52.0, 57.8, 58.5, 65.0, 72.2 Mbps
  • BPSK: 1, 6, 6.5, 7.2, 9 Mbps
  • QPSK: 2, 12, 13, 14.4, 18, 19.5, 21.7 Mbps
  • CCK: 5.5, 11 Mbps
  • 16-QAM: 24, 26, 28.9, 36, 39, 43.3 Mbps
  • 64-QAM: 48, 52, 54, 57.8, 58.5, 65, 72.2 Mbps
802.11n Spatial Streams 1 (Single Input, Single Output)
Bluetooth® Data Rates Supported 1,2,3 Mbps
Bluetooth® Modulation
  • GHSK: 1 Mbps
  • Pi/4-DQPSK: 2 Mbps
  • 8-DPSK: 3 Mbps
Regulatory Domain Support
  • FCC (Americas, Parts of Asia and Middle East)
  • ETSI (Europe, Middle East, Africa and Parts of Asia)
  • MIC (formerly TELEC) (Japan)
  • KC (formerly KCC)(Korea)
2.4 GHz Frequency Bands
  • 2.4 GHz to 2.483 GHz
  • 2.4 GHz to 2.483 GHz
  • 2.4 GHz to 2.495 GHz
  • 2.4 GHz to 2.483 GHz
5 GHz Frequency Bands
  • 5.15 GHz to 5.35 GHz
  • 5.47 GHz to 5.725 GHz
  • FCC:
  • 5.15 GHz to 5.35 GHz
  • 5.47 GHz to 5.725 GHz
  • 5.725 GHz to 5.82 GHz
  • MIC:
  • 5.15 GHz to 5.35 GHz
  • KC:
  • 5.15 GHz to 5.35 GHz
  • 5.725 GHz to 5.82 GHz
2.4 GHz Operating Channels
  • ETSI:13 (3 non-overlapping) 
  • FCC:11 (3 non-overlapping) 
  • MIC:14 (4 non-overlapping) 
  • KC:13 (3 non-overlapping) 
5 GHz Operating Channels
  • ETSI: 19 non-overlapping
  • FCC: 23 non-overlapping
  • MIC: 8 non-overlapping
  • KC: 12 non-overlapping
Transmit Power 

Maximum transmit power will vary according to individual country regulations. All values nominal, +/-2 dBm
Note: Laird 40 series radios support a single spatial stream and 20 MHz channels only  
  • 6 Mbps 16 dBm (40 mW)
  • 54 Mbps 14 dBm (25 mW)
  • 1 Mbps 17 dBm (50 mW)
  • 11 Mbps 16 dBm (40 mW)
  • 6 Mbps 15 dBm (32 mW)
  • 54 Mbps 13 dBm (20 mW)
    802.11n (2.4 GHz):
  • 6.5 Mbps (MSCO) 15 dBm (32 mW)
  • 64 Mbps (MCS7) 11 dBm (13 mW)
    802.11n (5 GHz):
  • 6.5 Mbps (MSCO) 16 dBm (40 mW)
  • 65 Mbps (MCS7) 13 dBm (20 mW)
  • 1 Mbps 0 dBm (1mW)
  • 2 Mbps 0 dBm (1mW)
  • 3 Mbps 0dBm (1mW)
Typical Receiver Sensitivity  
  • 6 Mbps: -90 dBm  
  • 24 Mbps: -84 dBm  
  • 54 Mbps: -75 dBm (PER <= 10%)  
  • 1 Mbps: -96dBm  
  • 11 Mbps: -89 dBm (PER <=10%)  
  • 6 Mbps: -90 dBm  
  • 24 Mbps: -84 dBm  
  • 54 Mbps: -74 dBm (PER <= 10%)  
    802.11n (2.4 GHz):
  • MCS0 6.5 Mbps: -90 dBm  
  • MCS4 39 Mbps: -79 dBm  
  • MCS7 65 Mbps: -72 dBm  
    802.11n (5 GHz):
  • MCS0 6.5 Mbps: -89 dBm  
  • MCS4 39 Mbps: -79 dBm  
  • MCS7 65 Mbps: -71 dBm  
  • 1 Mbps: TBD  
  • 2 Mbps: TBD  
  • 3 Mbps: TBD  
Operating Systems Supported
  • Windows Mobile 6.5
  • Windows Mobile 6.1
  • Windows Mobile 6.0
  • Windows Mobile 5.0
  • Windows Embedded CE 7.0
  • Windows Embedded CE 6.0 R3
  • Windows Embedded CE 6.0 R2
  • Windows Embedded CE 6.0
  • Windows Embedded CE 5.0
  • Linux, 2.6x, 3.x.x.kernel
  • Wireless Equivalent Privacy (WEP)
  • Wi-Fi® Protected Access (WPA)
  • IEEE 802.11i (WPA2)
  • Wireless Equivalent Privacy (WEP, RC4 Algorithm)
  • Temporal Key Integrity Protocol (TKIP, RC4 Algorithm)
  • Advanced Encryption Standard (AES, Rijndael Algorithm)
    Encryption Key Provisioning:
  • Static (40 and 128 bit lengths)
  • Pre-Shared (PSK)
  • Dynamic
    802.1X Extensible Authentication Protocol Types:
  • LEAP
Certifications Cisco_Compatible_35x30Cisco Compatible Extensions (version 4) 
Warranty Limited Lifetime 

All specifications are subject to change without notice 

The SSD40NBT is certified for compliance to various CE, ETSI, FCC, Industry Canada, and Wi-Fi® Alliance standards with certification to Cisco Compatible Extensions (CCX) specifications planned for the near term. The grants, approvals, and formal test reports associated with these certifications may be leveraged by Laird Technologies customers to achieve their required device certifications. The degree to which customers can leverage these Laird certifications is dependent upon the regulatory agency, industry body, and the type of end device.

If any additional information or guidance is required, please contact the Laird wireless certifications group via email or by telephone at 330.434.7929.


The SSD40NBT has been tested for compliance to various CE and ETSI standards and specifications:

 This testing was conducted with the following antennas:

These formal test reports may be leveraged by mobile and portable device vendors as part of their self declaration to obtain the CE mark required by members of the European Union. ETSI/CE rules differ from those of the FCC and IC in that there is no provision for a modular approval. All approvals and certifications must exist at the device level rather than the module (radio) level.

The SSD40NBT is fully compliant with Annex IV procedures in article 10.5 of R&TTE directive 99/5/EC.

Like all Laird brand devices, the SSD40NBT is fully compliant with European Union Directive 2011/65/EU or Reduction of Hazardous Substances (RoHS) and Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH) as per our Declaration of Compliance.

Laird 40NBT Series EN 300 328 v1.8.1 Updates

EN 300 328 v.1.8.1, which officially goes into effect on January 2015, includes new mandatory spectrum sharing requirements with the goal of reducing interference within the 2.4 GHz band. The following are the two main ways to achieve this: 

  • By incorporating adaptivity functionality such as DAA (Detect and Avoid), CCA (Clear Channel Assessment), and LBT (Listen Before Talk). 
  • By reducing the radio’s power, duty cycle, or both

The Laird 40NBT series radios (WB40NBT, MSD40NBT, and SSD40NBT) have successfully tested to the adaptivity requirements of the new standard. See the following for additional information: 

Note: The adaptivity testing for the MSD40NBT applies to both the SSD40NBT and the WB40NBT. These radios will have the full EN 300 328 v1.8.1 in place before the end of 2014.





Laird has received the following FCC grants for the SSD40NBT (FCC identifier TWG-SDCSSD40NBT):

FCC Part 15.247 Subpart C 

This grant relates to operation in the 2.412 to 2.462 GHz (ISM) and 5.745 to 5.805 GHz (UNII-3) frequency bands.

FCC Part 15.407 Subpart E 

This grant relates to operation in the 5.180 to 5.240 GHz (UNII-1), 5.280 to 5.320 GHz (UNII-2), and 5.500 to 5.700 GHz (UNII-2 Extended) frequency bands.

These grants were secured using the following antennas:

The above grants are Modular Approvals. Specific limitations are indicated on each grant.

When using this grant, the SSD40NBT must be installed only in mobile devices (devices which typically operate at distances greater than 20cm, or 7.9 inches, from the human body). When certifying portable devices (those that typically operate at distances less than 20cm from the human body) a new grant must be secured by the device vendor.

Note: Laird test data may be leveraged by the device vendor to minimize the cost and time associated with the certification process.

Industry Canada

The SSD40NBT will be certified to the Industry Canada (IC) RSS-210 standard. IC 661A-SDCSSD40NBT certification is based on FCC certification testing, using the same antennas and transmit power and covering the same frequency bands. Test reports and data sheets relevant to this certification will be available by the beginning of February 2012.

Australian/New Zealand Standard (AS/NZS)

The SSD40NBT is certified to the following Australian/New Zealand standard:

Wi-Fi® Alliance

Laird has received an Embedded Client Certification to the following standards: 802.11a, 802.11b, 802.11g, 802.11n, WPA (both personal and enterprise) and WPA2/802.11i (both personal and enterprise). For those host devices which include the SSD40NBT, the vendor may assert that their device incorporates a Wi-Fi® Certified Embedded Client. The vendor need not be a member of the Wi-Fi® Alliance to make this assertion but may not use the "Wi-Fi® Certified" logo in conjunction with their device unless they themselves are a Wi-Fi® Alliance member.

If the device vendor is a member of the Wi-Fi® Alliance, they may have WFA certification transferred to them only if they integrate the already-certified module into their device in a "hands off" manner; in other words, make no changes during integration that would impact the way in which the module operates. Laird Technologies will provide consultative services to those vendors who choose to pursue a Wi-Fi® Alliance certification for their Laird Wi-Fi equipped devices.

Cisco Compatible Extensions

Laird is a member of the Cisco Compatible Extensions (CCX) program and has a direct license from Cisco for intellectual property relating to the various versions of the CCX specifications. Laird has submitted the SSD40NBT to an authorized CCX test lab and has been found to be fully compliant with version 4 of the CCX specifications for application specific devices (ASDs). For those host devices which include the SSD40NBT, the vendor may assert that their device incorporates a Cisco Compatible radio module.

Device vendors who are members of the CCX program may also choose to secure CCX compliance for their end device. When incorporating the SSD40NBT into their product with the above software version, the vendor need not be a direct licensee for Cisco intellectual property. Rather, in this case the device vendor need only submit their SSD40NBT enabled device for CCX compliance testing to the version 4 test plan for ASDs. By leveraging Laird's "pre-approved" Wi-Fi software and by testing to the same plan, the vendor has a greater assurance that their actual testing will result in end device compliance. Laird Technologies will provide consultative services to those vendors who choose to pursue CCX compliance for their Laird Wi-Fi equipped devices.

Location Phone Number Email

Americas +1-800-492-2320 WirelessInfo@lairdtech.com

Request Information Stock Locator Button Embedded Wireless Solutions Technical Support

Manufacturer Reps


Europe +44-1628-858-940 WirelessInfo@lairdtech.com

Request InformationStock Locator Button Embedded Wireless Solutions Technical Support 

Hong Kong +852-2923-0610 (Sales)
+852-2923-0609 (Support)

Request InformationStock Locator Button Embedded Wireless Solutions Technical Support 

Warranty Statement

Laird Technologies warrants to the original end user customer of its products that its products are free from defects in material and workmanship. Subject to the conditions and limitations set forth below, Laird Technologies will, at its option, either repair or replace any part of its products that prove defective by reason of improper workmanship or materials. Repaired parts or replacement products will be provided by Laird Technologies on an exchange basis, and will be either new or refurbished to be functionally equivalent to new. If Laird Technologies is unable to repair or replace the product, it will refund the current value of the product at the time the warranty claim is made.

This limited warranty does not cover any damage to this product that results from improper installation, accident, abuse, misuse, natural disaster, insufficient or excessive electrical supply, abnormal mechanical or environmental conditions, or any unauthorized disassembly, repair, or modification. This limited warranty also does not apply to any product on which the original identification information has been altered, obliterated or removed, has not been handled or packaged correctly, has been sold as second-hand or has been resold.

This limited warranty covers only repair, replacement or refund for defective Laird Technologies products, as provided above. Laird Technologies is not liable for, and does not cover under warranty, any loss of data or any costs associated with determining the source of system problems or removing, servicing or installing Laird Technologies products. This warranty excludes 3rd party software, connected equipment or stored data. In the event of a claim, Laird Technologies' sole obligation shall be replacement of the hardware.


This limited warranty applies only to the original end user customer of the product. This limited warranty is non-transferable. This limited warranty is in force for the useful lifetime of the original end product into which the Laird Technologies product is installed. Useful lifetime of the original end product may vary but is not to exceed five (5) years from the original date of the end product purchase. Any repair, component replacement or modification to the original product constitutes the end of the lifetime of the end product as defined here.


Warranty on Laird Technologies products are only applicable if the parts were purchased from Laird Technologies authorized OEMs/distributors/resellers or directly from Laird Technologies.


The following parts are not covered by this warranty:

  • Products without the label containing Laird Technologies' serial number or MAC address
  • Products that are purchased from other end users
  • Products that Laird Technologies determines were not purchased through Laird Technologies authorized OEMs/distributors/resellers or directly from Laird Technologies
  • All EOL claims to return back to point of purchase or respective distributors.


The foregoing is the complete warranty for Laird Technologies products and supersedes all other warranties and representations, whether oral or written. Except as expressly set forth above, no other warranties are made with respect to Laird Technologies products and Laird Technologies expressly disclaims all warranties not stated herein, including, to the extent permitted by applicable law, any warranty that may exist under national, state, provincial or local law including but not limited to any implied warranty of non-infringement, merchantability or fitness for a particular purpose. All warranties, whether express or implied, are limited to the periods of time set forth above. 

Laird Technologies products are not authorized for use as critical components in life support equipment or for applications in which the failure or malfunction of the products would create a situation in which personal injury or death is likely to occur. Laird Technologies shall not be liable for the death of any person or any loss, injury or damage to persons or property by use of Laird Technologies products.

Laird Technologies' total liability under this or any other warranty, express or implied, is limited to repair, replacement or refund. Repair, replacement or refund are the sole and exclusive remedies for breach of warranty or any other legal theory. To the fullest extent permitted by applicable law, Laird Technologies shall not be liable to the purchaser or end user customer of a Laird Technologies product for any damages, expenses, lost data, lost revenues, lost savings, lost profits, or any other incidental or consequential damages arising from the purchase, use or inability to use the Laird Technologies product, even if Laird Technologies has been advised of the possibility of such damages.